Secret Code in Android

Did you know that android has a secret code? Perhaps from some secret code you have ever encountered on the HP-based java like * # 06 # which is used to check the IMEI on your device. In this article I try to share with you, about the secret code on android (not just the vendor Samsung, but at several other major vendors such as LG, HTC, Sony, and so on. Because several articles on the internet I have met most of the secret code only addresses the vendor samsung).

Here is a secret code that I took from a few forums and blogs on the internet

Secret Code By Vendor

*#1234# = Firmware Version.

*#2222# = H/W Version.

*#8999*8376263# = All Versions Together.

*#06# = Show IMEI

*#8999*8378# = Test Menu.

*#4777*8665# = GPSR Tool.

*#8999*523# = LCD Brightness.

*#8999*377# = Error Menu.

*#8999*327# = EEP Menu.

*#8999*667# = Debug Mode.

*#92782# = PhoneModel. (Wap)

#*5737425# = JAVA Mode.

*#2255# = Call List.

*#232337# = Bluetooth MAC Adress.

*#5282837# = Java Version.

#*4773# = Incremental Redundancy.

#*7752# = 8 PSK uplink capability bit.

#*7785# = Reset wakeup & RTK timer cariables/variables.

#*7200# = Tone Generator Mute.

#*3888# = BLUETOOTH Test mode.

#*7828# = Task screen.

#*#8377466# = S/W Version & H/W Version.

#*2562# = Restarts Phone.

#*2565# = No Blocking? General Defense.

#*3353# = General Defense, Code Erased.

#*3837# = Phone Hangs on White screen.

#*3849# = Restarts Phone.

#*3851# = Restarts Phone.

#*3876# = Restarts Phone.

#*7222# = Operation Typ: (Class C GSM)

#*7224# = !!! ERROR !!!

#*7252# = Operation Typ: (Class B GPRS)

#*7271# = CMD: (Not Available)

#*7274# = CMD: (Not Available)

#*7337# = Restarts Phone. (Resets Wap Settings)

#*2787# = CRTP ON/OFF.

#*2886# = AutoAnswer ON/OFF.

#*3737# = L1 AFC.

#*5133# = L1 HO Data.

#*7288# = GPRS Detached/Attached.

#*7287# = GPRS Attached.

#*7666# = White Screen.

#*7693# = Sleep Deactivate/Activate.

#*7284# = L1 HO Data.

#*2256# = Calibration info? (For CMD set DEBUGAUTONOMY in cihard.opt)

#*2286# = Databattery.

#*2527# = GPRS switching set to (Class 4, 8, 9, 10)

#*2679# = Copycat feature Activa/Deactivate.

#*3940# = External looptest 9600 bps.

#*4263# = Handsfree mode Activate/Deactivate.

#*4700# = Please use function 2637.

#*7352# = BVMC Reg value (LOW_SWTOFF, NOMINAL_SWTOFF)

#*2558# = Time ON.

#*3370# = Same as 4700.

#*3941# = External looptest 115200 bps

#*5176# = L1 Sleep.

#*7462# = SIM Phase.

#*7983# = Voltage/Freq.

#*7986# = Voltage.

#*8466# = Old Time.

#*2255# = Call Failed.

#*5187# = L1C2G trace Activate/Deactivate.

#*5376# = DELETE ALL SMS!!!!.

#*6837# = Official Software Version: (0003000016000702)

#*7524# = KCGPRS: (FF FF FF FF FF FF FF FF 07)

#*7562# = LOCI GPRS: (FF FF FF FF FF FF FF FF FF FF FF FE FF 01)

#*2337# = Permanent Registration Beep.

#*2474# = Charging Duration.

#*2834# = Audio Path. (Handsfree)

#*3270# = DCS Support Activate/Deactivate.

#*3282# = Data Activate/Deactivate.

#*3476# = EGSM Activate/Deactivate.

#*3676# = FORMAT FLASH VOLUME!!!

#*4760# = GSM Activate/Deactivate.

#*4864# = White Screen.

#*5171# = L1P1.

#*5172# = L1P2.

#*5173# = L1P3.

#*7326# = Accessory.

#*7683# = Sleep variable.

#*8465# = Time in L1.

#*2252# = Current CAL.

#*2836# = AVDDSS Management Activate/Deactivate.

#*3877# = Dump of SPY trace.

#*7728# = RSAV.

#*2677# = Same as 4700.

#*3728# = Time 2 Decod.

#*3725# = B4 last off.

#*7372# = Resetting the time to DPB variables.

#*7732# = Packet flow context bit Activate/Deactivate.

#*6833# = New uplink establishment Activate/Deactivate.

#*3273# = EGPRS multislot. (Class 4, 8, 9, 10)

#*7722# = RLC bitmap compression Activate/Deactivate.

#*2351# = Blinks 1347E201 in RED.

#*4472# = Hysteresis of serving cell: 3 dB

#*2775# = Switch to 2 inner speaker.

#*9270# = Force WBS.

#*7878# = FirstStartup. (0=NO, 1=YES)

#*3757# = DSL UART speed set to. (LOW, HIGH)

#*8726# = Switches USBACM to Normal.

#*8724# = Switches USBACM to Generator mode.

#*8727# = Switches USBACM to Slink mode.

#*8725# = Switches USBACM to Loop-back mode.

#*3838# = Blinks 3D030300 in RED.

#*2077# = GPRS Switch.

#*2027# = GPRS Switch.

#*0227# = GPRS Switch.

#*0277# = GPRS Switch.

#*8370# = Tfs4.0 Test 0.

#*8371# = Tfs4.0 Test 1.

#*8372# = Tfs4.0 Test 2.

#*8373# = Tfs4.0 Test 3.

#*8374# = Tfs4.0 Test 4.

#*8375# = Tfs4.0 Test 5.

#*8376# = Tfs4.0 Test 6.

#*8377# = Tfs4.0 Test 7.

#*8378# = Tfs4.0 Test 8.

#*8379# = Tfs4.0 Test 9.

#*7878# = FirstStartup. (0=NO, 1=YES)

#*3838# = Blinks 3D030300 in RED.

#*2077# = GPRS Switch.

#*2027# = GPRS Switch.

#*0227# = GPRS Switch.

#*0277# = GPRS Switch.

#*22671# = AMR REC START.

#*22672# = Stop AMR REC. (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)

#*22673# = Pause REC.

#*22674# = Resume REC.

#*22675# = AMR Playback.

#*22676# = AMR Stop Play.

#*22677# = Pause Play.

#*22678# = Resume Play.

#*77261# = PCM Rec Req.

#*77262# = Stop PCM Rec.

#*77263# = PCM Playback.

#*77264# = PCM Stop Play.

#*22679# = AMR Get Time.

*#8999*364# = Watchdog ON/OFF.

*#8999*427# = WATCHDOG signal route setup.

*2767*226372# = Camera Reset. (deletes photos)

*2767*3855# = E2P Full Reset.

*2767*2878# = E2P Custom Reset.

*2767*927# = E2P Wap Reset.

*2767*226372# = E2P Camera Reset.

*2767*688# = Reset Mobile TV.

*#*#0*#*#* = LCD test

#7263867# = RAM Dump. (On or Off)

samsung mobile code. - - - wap / mms code.

*2767*43927# = Austria WAP Settings.

*2767*420927# = Czech WAP Settings.

*2767*33927# = France WAP Settings.

*2767*49927# = Germany WAP Settings.

*2767*30927# = Greece WAP Settings.

*2767*39927# = Italy WAP Settings.

*2767*31927# = Netherlands WAP Settings.

*2767*351927# = Portugal WAP Settings.

*2767*7927# = Russia WAP Settings.

*2767*34927# = Spain WAP Settings.

*2767*46927# = Sweden WAP Settings.

*2767*44927# = UK WAP Settings.

*2767*380927# = Ukraine WAP Settings.

*2767*73738927# = WAP Settings Reset.

*2767*43667# = Austria MMS Settings.

*2767*420667# = Czech MMS Settings.

*2767*33667# = France MMS Settings.

*2767*49667# = Germany MMS Settings.

*2767*30667# = Greece MMS Settings.

*2767*39667# = Italy MMS Settings.

*2767*31667# = Netherlands MMS Settings.

*2767*351667# = Portugal MMS Settings.

*2767*7667# = Russia MMS Settings.

*2767*34667# = Spain MMS Settings.

*2767*46667# = Sweden MMS Settings.

*2767*44667# = UK MMS Settings.

*2767*380667# = Ukraine MMS Settings.

samsung mobile code. - - - email code.

#*36245# Turns Email TestMenu on.

*2767*22236245# Email EPP set (....)!

*2767*837836245# Email Test Account!

*2767*29536245# Email Test2 Account!

*2767*036245# Email EPP reset!

*2767*136245# Email EPP set (1)!

*2767*736245# Email EPP set (7)!

*2767*3036245# Email...

*2767*3136245# Email...

*2767*3336245# Email...

*2767*3436245# Email...

*2767*3936245# Email...

*2767*4136245# Email...

*2767*4336245# Email...

*2767*4436245# Email...

*2767*4536245# Email...

*2767*4636245# Email...

*2767*4936245# Email...

*2767*6036245# Email...

*2767*6136245# Email...

*2767*6236245# Email...

*2767*6336245# Email...

*2767*6536245# Email...

*2767*6636245# Email...

*2767*8636245# Email...

*2767*85236245# Email...

samsung mobile code. - - - lock code.

*#7465625# = Check the locks.

*7465625*638*Code# = Enables Network lock.

#7465625*638*Code# = Disables Network lock.

*7465625*782*Code# = Enables Subset lock.

#7465625*782*Code# = Disables Subset lock.

*7465625*77*Code# = Enables SP lock.

#7465625*77*Code# = Disables SP lock.

*7465625*27*Code# = Enables CP lock.

#7465625*27*Code# = Disables CP lock.

*7465625*746*Code# = Enables SIM lock.

#7465625*746*Code# = Disables SIM lock.

*7465625*228# = Activa lock ON.

#7465625*228# = Activa lock OFF.

*7465625*28638# = Auto Network lock ON.

#7465625*28638# = Auto Network lock OFF.

*7465625*28782# = Auto subset lock ON.

#7465625*28782# = Auto subset lock OFF.

*7465625*2877# = Auto SP lock ON.

#7465625*2877# = Auto SP lock OFF.

*7465625*2827# = Auto CP lock ON.

#7465625*2827# = Auto CP lock OFF.

*7465625*28746# = Auto SIM lock ON.

#7465625*28746# = Auto SIM lock OFF.

samsung mobile code. - - - sound code.

Samsung phones.

Dial *#6984125*#

Test menu dial *#9072641*# (You need this one i think.)

Click 5 Audio - 2 AP volume config

Now you see zie je 4 things:

1 RCV config

2 EAR config

3 SPK config

4 BTH config

Now you see this:

1 MP volume

2 Keytone volume

3 Ringtone volume

4 Rec volume

5 FM radio volume

6 Camera volume

7 Voice call volume

8 Vt call volume

9 Voice memo volume

( SPK = Speaker )( Ear = Headset )

Tune Headset volume:

*#9072641*# - 2 EAR config - 3 Ringtone volume - Stap 6 tune it to 10

Tune movie volume:

*#9072641*# - 3 SPK config - 3 Ringtone volume - Stap 6 tune it to 10

Note:

-Be sure you note down the initial settings if you make changes.

-A hard reset deletes all files and settings in internal memory, or equal to reformat the firmware. If you have click the button it will immediately agree hardreset, and there is no option to cancel.

-Factory reset only delete accounts, system and application settings

*#*#4636#*#* = Displaying Information Phone, Battery, Battery Usage, Usage Stats HP Android.

* # * # 7780 # * # * = Deleting / Updating Data Factory reset. Delete accounts that are stored on Google Android, Data Systems and Applications and Settings and Applications in Download. But does not remove the SD Card files and applications in Android.When using this code will appear PopUp to make sure you delete or not. So it can be canceled* 2767 * 3855 # = The code is used to Format Factory. Delete everything and reinstall the HP firmware android. Cancel can not, so do not use this code ..* # * # 34971539 # * # * = Display information for Camera. Camera Firmware Update menu displays the image, in SD, data Camera Firmware, and update firmware. Do not select the first option because it will ruin your android HP Camera.* # * # 7594 # * # * = This code is to change the End Call / Power on your Android Hp. If you hold the button it will display the Silent Mode option, Airplane Mode and Power Off.* # * # 273 283 * 255 * 663 282 * # * # * = The code is open the file copy screen where you can backup your media files.* # * # 197328640 # * # * = This code is used to enter the Service mode. To change the Service Mode settings such as WLAN, GPS and Bluetooth.* # * # * # * 232 339 # or * # * # * # * 526 # or * # * # 528 # * # * = Test WLAN, use the Menu button to start the test.* # * # 232 338 # * # * = Displays the MAC address of your Android WiFi.* # * # 1472365 # * # * or * # * # 1575 # * # * = Test GPS* # * # 232 331 # * # * = Test Bluetooth* # * # 232337 # * # = Displays the Bluetooth address of your Android.* # * # 8255 # * # * = GTalk Service Monitor Displays.* # * # 4986 * 2650468 # * # * = PDA, Phone, H / W, RFCallDate* # * # 1234 # * # * = PDA danPhone* # * # 1111 # * # * = FTA SW Version* # * # 2222 # * # * = FTA HW Version* # * # 44 336 # * # * = PDA, Phone, CSC, Build Time, Changelist numberCode to perform factory tests Android* # 06 # Show IMEI =* # * # 0283 # * # * = Packet Loopback* # * # 0 * # * # * = test LCDs* # * # 0673 # * # * OR * # * # 0289 # * # * = test Melodies* # * # 0842 # * # * = Vibration tests and Backlight* # * # 2663 # * # * = Touch screen version* # * # 2664 # * # * = Touch screen test* # * # 0588 # * # * = Proximity sensor test* # * # 3264 # * # * = RAM version* # * # 4636 # * # * = Test menu1809 # * 990 # = hidden menu* # 06 # = View IMEI number* # * # 8255 # * # * = Gtalk service monitorSources: Kaskus and some forumsNote:-Be sure you note down the initial settings if you make changes.-A hard reset deletes all files and settings in internal memory, or equal to reformat the firmware. If you have click the button it will immediately agree hardreset, and there is no option to cancel.-Factory reset only delete accounts, system and application settings

Tested/Working:

##775# = EPST/PRL - PRL Settings

##786# = EPST - Status Menu

##3282# = EPST - Data Programming Menu (User Name, Advanced, Restore, Enable HFA, DSA Server, MMSC URL)

##33284# = Debug - Debug Menu – (Debug Screen, Test Calls, RC Data, HDR/1X Selection, Voice Privacy, DTMF Set, Korea Mode Set)

##3424# = Diagnostic - Connect to phone in diag mode

##2539# = EPST/A-Key - Data A key menu

##7738# = EPST/P_Rev - Protocol Revision

##8626337# = EPST/Vocoder - Unsure

##4772579# = Reset the GPS

##72786# = changes DSA back to Factory

##889# = enables TTY

----- Was only able to get the following working on CM6 Rom -----

*#*#4636#*#* - Phone Information - "Phone information, Battery information, Battery history, Useage statistics, Wifi information"

Confirmed not Working:

##UPST# = modem directory

##778# = EPST - Advanced Programming

Unverified:

##37872# = Full Speed USB Mode - Enable/Disable

##3386# = DDTM - Enable/Disable

*#0*# = Test Utility - SAFE TO PLAY WITH

*#0011# = Service menu

*#0228# = Battery Status

*#0283# = Receiver Packet loopback

*#0289# = Melody Test again?

*#0673# = Melody Test SAFE TO PLAY WITH

*#0782# = RTCTimeRead displays time (and seconds)

*#0842# = Vibration test SAFE TO PLAY WITH

*#147852# = Allows you to access many screens including CDMA DATA Connections

*#1472365# = GPS Setup

*#1575# = Service menu

*#197328640# = Service menu

*#2263# = ??

*#232331# = Bluetooth RF Test Mode

*#2454# = Low Battery Power Off

*#2580# = Service menu

*#2663# = Touchscreen Accuracy Test SAFE TO PLAY WITH

*#2664# = Touchscreen Firmware Version

*#2664# = Main Firmware Update

*#2767*2878# = Service menu

*#32489# = Service menu

*#3264# = RAM Version

*#3282*727336*# = Current Data State

*#369852# = Allows you to access many screens including CDMA DATA Connections

*#4238378# = Service menu

*#6984125*# = Service menu

*#7284# = Service menu

*#745# = Sec_RIL_Dump allows you to copy to phone memory, clear ril log, (greyed out copy to SDcard and view RIL log), exit

*#7450# = Phone Dump Mode Disable

*#7451# = Phone Dump Mode Enable

*#767*3855# = Factory Format – CRAP!! WARNING!!!

*#7780# = Factory Reset

*#9090# = Service menu

*#9900# = SysDump copy logcat/dumpstate/dumpsys, enable debug log, copy watchdogdumpstatelog)

Note:

-Be sure you note down the initial settings if you make changes.

-A hard reset deletes all files and settings in internal memory, or equal to reformat the firmware. If you have click the button it will immediately agree hardreset, and there is no option to cancel.

-Factory reset only delete accounts, system and application settings

For Sony Erricsson Xperia require special ways to access the secret code, so do the click of a button □ ← ← □ ← □ □ ←

Secret code to another

# = To display the Number of the mobile SIM

0 # = To display the last dial number

* # 06 # = To display the IMEI Number of the mobile

* # 0000 # = Use to reset Sony Ericsson mobile English menu

<** <= Use to display the information about mobile network

> * << * <* = Use to display the mobile software version

> * << * <* = Use to display the secret menu of Sony mobile status.

> *> (>) = To display the text contained in the phone

<0000> = Use to reset Sony Ericsson mobile default theme

<0 0 0 0> = Use to reset Sony Ericsson mobile default language

** 04 * 0000 * 0000 * 0000 # = You can access you mobile settings without SIM card

904 060 +> = Use to reset mobile phone settings

+ 904 093 = Use the menu to display the CDMA Mode

* # * # 7378423 # * # * = Service menu

On / off button Press and release Quickly on / off button to verify the battery

Source: XDA, youtube and some of the blogs

Note:

-Be sure you note down the initial settings if you make changes.

-A hard reset deletes all files and settings in internal memory, or equal to reformat the firmware. If you have click the button it will immediately agree hardreset, and there is no option to cancel.

-Factory reset only delete accounts, system and application settings
Valid only on STOCK-ROM.

If the vendor of your android does not exist on this article, I will help you to find your secret code on android using the Secret Code Revealer you can download here

This secret code please use it wisely and carefully, secret code is generally used for improvements on the test device or devices whether hardware or software component to function. DWYOR.

View the Original article