Technology News, Micromax, Mobiles Flashing Software, Flash Tool, Pokemon GO Apk, Income Online, Moto G4 Plus, Sony PC, Latest Version, samsung note, Huawei Smartphone

Monday, December 24, 2012

Simulating Denial of Services Attack in Wireless Sensor Networks

Simulating Denial of Services Attack in Wireless Sensor Networks - technology is getting more advanced every day .. if you want to know the progress that happened please visit this blog Technology News because it will always update the latest information, now we will discuss first about Simulating Denial of Services Attack in Wireless Sensor Networks hopefully this information can answer the questions you submit to google, ok please see:

Articles : Simulating Denial of Services Attack in Wireless Sensor Networks
full Link : Simulating Denial of Services Attack in Wireless Sensor Networks

You can also see our article on:


Simulating Denial of Services Attack in Wireless Sensor Networks

Program
###########################################################################
# security.tcl
# auther : Ebin Ephrem
# http://micromyaw.blogspot.com
# mail2ebine@gmail.com

#Simulation settings - security

#IEEE 802.11 with Distributed co ordination function

#nominal bit rate 2 Mb/s

#radio range 100 meter

#random way-point model

#node speed  1 m/s - 15 m/s

#CBR 20 nodes

#source generate 512 bytes

#transmission rate 4 packets /sec

#area of simulation 1000m x 300 m

#number of nodes is 50

#total simulation time 500 sec

#AODV routing protocol used

#===================================
#     Simulation parameters setup
#===================================
Mac/802_11 set basicRate_ 2Mb              ;#Rate for Control Frames

set val(chan)   Channel/WirelessChannel    ;# channel type
set val(prop)   Propagation/TwoRayGround   ;# radio-propagation model
set val(netif)  Phy/WirelessPhy            ;# network interface type
set val(mac)    Mac/802_11                 ;# MAC type
set val(ifq)    Queue/DropTail/PriQueue    ;# interface queue type
set val(ll)     LL                         ;# link layer type
set val(ant)    Antenna/OmniAntenna        ;# antenna model
set val(ifqlen) 20                         ;# max packet in ifq
set val(nn)     50                         ;# number of mobilenodes
set val(rp)     AODV                       ;# routing protocol
set val(x)      1000                      ;# X dimension of topography
set val(y)      300                      ;# Y dimension of topography
set val(stop)   500.0                         ;# time of simulation end

#===================================
#        Initialization      
#===================================
#Create a ns simulator
set ns [new Simulator]

# define color index
$ns color 0 red
$ns color 1 blue
$ns color 2 chocolate
$ns color 3 red
$ns color 4 brown
$ns color 5 tan
$ns color 6 gold
$ns color 7 black


#Setup topography object
set topo       [new Topography]
$topo load_flatgrid $val(x) $val(y)
create-god $val(nn)

#Open the NS trace file
set tracefile [open dos.tr w]
$ns trace-all $tracefile

#Open the NAM trace file
set namfile [open dos.nam w]
$ns namtrace-all $namfile
$ns namtrace-all-wireless $namfile $val(x) $val(y)
set chan [new $val(chan)];#Create wireless channel

#===================================
#     Mobile node parameter setup
#===================================
$ns node-config -adhocRouting  $val(rp) \
                -llType        $val(ll) \
                -macType       $val(mac) \
                -ifqType       $val(ifq) \
                -ifqLen        $val(ifqlen) \
                -antType       $val(ant) \
                -propType      $val(prop) \
                -phyType       $val(netif) \
                -channel       $chan \
                -topoInstance  $topo \
                -agentTrace    ON \
                -routerTrace   ON \
                -macTrace      ON \
                -movementTrace ON

#===================================
#        Nodes Definition      
#===================================
#Create 50 nodes
set n0 [$ns node]
$n0 set X_ 815
$n0 set Y_ 300
$n0 set Z_ 0.0
$ns initial_node_pos $n0 20
set n1 [$ns node]
$n1 set X_ 904
$n1 set Y_ 234
$n1 set Z_ 0.0
$ns initial_node_pos $n1 20
set n2 [$ns node]
$n2 set X_ 122
$n2 set Y_ 397
$n2 set Z_ 0.0
$ns initial_node_pos $n2 20
set n3 [$ns node]
$n3 set X_ 110
$n3 set Y_ 266
$n3 set Z_ 0.0
$ns initial_node_pos $n3 20
set n4 [$ns node]
$n4 set X_ 225
$n4 set Y_ 50
$n4 set Z_ 0.0
$ns initial_node_pos $n4 20
set n5 [$ns node]
$n5 set X_ 670
$n5 set Y_ 102
$n5 set Z_ 0.0
$ns initial_node_pos $n5 20
set n6 [$ns node]
$n6 set X_ 713
$n6 set Y_ 245
$n6 set Z_ 0.0
$ns initial_node_pos $n6 20
set n7 [$ns node]
$n7 set X_ 727
$n7 set Y_ 71
$n7 set Z_ 0.0
$ns initial_node_pos $n7 20
set n8 [$ns node]
$n8 set X_ 963
$n8 set Y_ 8
$n8 set Z_ 0.0
$ns initial_node_pos $n8 20
set n9 [$ns node]
$n9 set X_ 510
$n9 set Y_ 295
$n9 set Z_ 0.0
$ns initial_node_pos $n9 20
set n10 [$ns node]
$n10 set X_ 770
$n10 set Y_ 211
$n10 set Z_ 0.0
$ns initial_node_pos $n10 20
set n11 [$ns node]
$n11 set X_ 692
$n11 set Y_ 230
$n11 set Z_ 0.0
$ns initial_node_pos $n11 20
set n12 [$ns node]
$n12 set X_ 987
$n12 set Y_ 264
$n12 set Z_ 0.0
$ns initial_node_pos $n12 20
set n13 [$ns node]
$n13 set X_ 483
$n13 set Y_ 16
$n13 set Z_ 0.0
$ns initial_node_pos $n13 20
set n14 [$ns node]
$n14 set X_ 526
$n14 set Y_ 38
$n14 set Z_ 0.0
$ns initial_node_pos $n14 20
set n15 [$ns node]
$n15 set X_ 433
$n15 set Y_ 121
$n15 set Z_ 0.0
$ns initial_node_pos $n15 20
set n16 [$ns node]
$n16 set X_ 141
$n16 set Y_ 30
$n16 set Z_ 0.0
$ns initial_node_pos $n16 20
set n17 [$ns node]
$n17 set X_ 124
$n17 set Y_ 86
$n17 set Z_ 0.0
$ns initial_node_pos $n17 20
set n18 [$ns node]
$n18 set X_ 182
$n18 set Y_ 261
$n18 set Z_ 0.0
$ns initial_node_pos $n18 20
set n19 [$ns node]
$n19 set X_ 149
$n19 set Y_ 282
$n19 set Z_ 0.0
$ns initial_node_pos $n19 20
set n20 [$ns node]
$n20 set X_ 319
$n20 set Y_ 46
$n20 set Z_ 0.0
$ns initial_node_pos $n20 20
set n21 [$ns node]
$n21 set X_ 394
$n21 set Y_ 279
$n21 set Z_ 0.0
$ns initial_node_pos $n21 20
set n22 [$ns node]
$n22 set X_ 440
$n22 set Y_ 372
$n22 set Z_ 0.0
$ns initial_node_pos $n22 20
set n23 [$ns node]
$n23 set X_ 124
$n23 set Y_ 238
$n23 set Z_ 0.0
$ns initial_node_pos $n23 20
set n24 [$ns node]
$n24 set X_ 902
$n24 set Y_ 287
$n24 set Z_ 0.0
$ns initial_node_pos $n24 20
set n25 [$ns node]
$n25 set X_ 970
$n25 set Y_ 76
$n25 set Z_ 0.0
$ns initial_node_pos $n25 20
set n26 [$ns node]
$n26 set X_ 71
$n26 set Y_ 51
$n26 set Z_ 0.0
$ns initial_node_pos $n26 20
set n27 [$ns node]
$n27 set X_ 507
$n27 set Y_ 30
$n27 set Z_ 0.0
$ns initial_node_pos $n27 20
set n28 [$ns node]
$n28 set X_ 866
$n28 set Y_ 34
$n28 set Z_ 0.0
$ns initial_node_pos $n28 20
set n29 [$ns node]
$n29 set X_ 173
$n29 set Y_ 44
$n29 set Z_ 0.0
$ns initial_node_pos $n29 20
set n30 [$ns node]
$n30 set X_ 334
$n30 set Y_ 02
$n30 set Z_ 0.0
$ns initial_node_pos $n30 20
set n31 [$ns node]
$n31 set X_ 645
$n31 set Y_ 270
$n31 set Z_ 0.0
$ns initial_node_pos $n31 20
set n32 [$ns node]
$n32 set X_ 824
$n32 set Y_ 300
$n32 set Z_ 0.0
$ns initial_node_pos $n32 20
set n33 [$ns node]
$n33 set X_ 963
$n33 set Y_ 46
$n33 set Z_ 0.0
$ns initial_node_pos $n33 20
set n34 [$ns node]
$n34 set X_ 389
$n34 set Y_ 3
$n34 set Z_ 0.0
$ns initial_node_pos $n34 20
set n35 [$ns node]
$n35 set X_ 145
$n35 set Y_ 48
$n35 set Z_ 0.0
$ns initial_node_pos $n35 20
set n36 [$ns node]
$n36 set X_ 110
$n36 set Y_ 53
$n36 set Z_ 0.0
$ns initial_node_pos $n36 20
set n37 [$ns node]
$n37 set X_ 121
$n37 set Y_ 51
$n37 set Z_ 0.0
$ns initial_node_pos $n37 20
set n38 [$ns node]
$n38 set X_ 788
$n38 set Y_ 44
$n38 set Z_ 0.0
$ns initial_node_pos $n38 20
set n39 [$ns node]
$n39 set X_ 797
$n39 set Y_ 02
$n39 set Z_ 0.0
$ns initial_node_pos $n39 20
set n40 [$ns node]
$n40 set X_ 1472
$n40 set Y_  15
$n40 set Z_ 0.0
$ns initial_node_pos $n40 20
set n41 [$ns node]
$n41 set X_ 526
$n41 set Y_  90
$n41 set Z_ 0.0
$ns initial_node_pos $n41 20
set n42 [$ns node]
$n42 set X_ 103
$n42 set Y_ 77
$n42 set Z_ 0.0
$ns initial_node_pos $n42 20
set n43 [$ns node]
$n43 set X_ 123
$n43 set Y_ 86
$n43 set Z_ 0.0
$ns initial_node_pos $n43 20
set n44 [$ns node]
$n44 set X_ 123
$n44 set Y_ -34
$n44 set Z_ 0.0
$ns initial_node_pos $n44 20
set n45 [$ns node]
$n45 set X_ 343
$n45 set Y_ -166
$n45 set Z_ 0.0
$ns initial_node_pos $n45 20
set n46 [$ns node]
$n46 set X_ 905
$n46 set Y_ -214
$n46 set Z_ 0.0
$ns initial_node_pos $n46 20
set n47 [$ns node]
$n47 set X_ 880
$n47 set Y_ -47
$n47 set Z_ 0.0
$ns initial_node_pos $n47 20
set n48 [$ns node]
$n48 set X_ 423
$n48 set Y_ -44
$n48 set Z_ 0.0
$ns initial_node_pos $n48 20
set n49 [$ns node]
$n49 set X_ 154
$n49 set Y_ -114
$n49 set Z_ 0.0
$ns initial_node_pos $n49 20

#===================================
#        Generate movement        
#===================================


$ns at 1 " $n0 setdest 350 10 5 "
$ns at 1 " $n45 setdest 450 200 5 "
$ns at 4 " $n1 setdest 10 30 10 "
$ns at 20 " $n2 setdest 150 50 7 "
$ns at 10 " $n3 setdest 867 33 7 "
$ns at 10 " $n7 setdest 45 40 15 "
$ns at 87 " $n8 setdest 816 30 4 "

$ns at 107 " $n48 setdest 100 30 4 "

$ns at 87 " $n8 setdest 901 200 6 "
$ns at 300 " $n35 setdest 826 30 9 "  
$ns at 40 " $n39 setdest 150 150 7 "
$ns at 200 " $n25 setdest 450 175 7 "
$ns at 260 " $n32 setdest 950 60 7 "
$ns at 120 " $n29 setdest 150 250 7 "
$ns at 20 " $n12 setdest 999 250 7 "
$ns at 20 " $n42 setdest 150  245 7 "
$ns at 87 " $n21 setdest 924 112 6 "
$ns at 87 " $n10 setdest 659 12 6 "
$ns at 87 " $n18 setdest 109 020 6 "
$ns at 300 " $n35 setdest 268 30 9 "  
$ns at 40 " $n9 setdest 150 150 7 "
$ns at 200 " $n34 setdest 450 75 7 "
$ns at 260 " $n36 setdest 950 65 7 "

$ns at 120 " $n11 setdest 120 250 7 "
$ns at 20 " $n15 setdest 100 100 7 "
$ns at 20 " $n15 setdest 150  135 7 "



   
#===================================
#        Agents Definition      
#===================================




set tcp [new Agent/TCP/Newreno]
$tcp set class_ 2
set sink [new Agent/TCPSink]
$ns attach-agent $n15 $tcp
$ns attach-agent $n34 $sink
$ns connect $tcp $sink
set ftp [new Application/FTP]
$ftp attach-agent $tcp
$ns at 3.0 "$ftp start"


set tcp [new Agent/TCP/Newreno]
$tcp set class_ 2
set sink [new Agent/TCPSink]
$ns attach-agent $n0 $tcp
$ns attach-agent $n1 $sink
$ns connect $tcp $sink
set ftp [new Application/FTP]
$ftp attach-agent $tcp
$ns at 5.0 "$ftp start"

set tcp [new Agent/TCP/Newreno]
$tcp set class_ 2
set sink [new Agent/TCPSink]
$ns attach-agent $n4 $tcp
$ns attach-agent $n10 $sink
$ns connect $tcp $sink
set ftp [new Application/FTP]
$ftp attach-agent $tcp
$ns at 50.0 "$ftp start"

set tcp [new Agent/TCP/Newreno]
$tcp set class_ 2
set sink [new Agent/TCPSink]
$ns attach-agent $n40 $tcp
$ns attach-agent $n12 $sink
$ns connect $tcp $sink
set ftp [new Application/FTP]
$ftp attach-agent $tcp
$ns at 55.0 "$ftp start"

# In ns TCP connection will be green
$tcp set fid_ 1

# To establish FTP application  tcp connection above
set ftp [new Application/FTP]
$ftp attach-agent $tcp
$ftp set type_ FTP

# Establish a UDP connection
set udp [new Agent/UDP]
$ns attach-agent $n1 $udp
set null [new Agent/Null]
$ns attach-agent $n4 $null
$ns connect $udp $null

# Udp nam in connection red
$udp set fid_ 2

#===================================
#        Applications Definition      
#===================================
# CBR application created on top of UDP connections
set cbr [new Application/Traffic/CBR]
$cbr attach-agent $udp
$cbr set type_ CBR
$cbr set packet_size_ 1000
$cbr set rate_ 1mb
$cbr set random_ false


#===================================
#        Termination      
#===================================
#Define a 'finish' procedure
proc finish {} {
    global ns tracefile namfile
    $ns flush-trace
    close $tracefile
    close $namfile
    exec nam dos.nam &
    exit 0
}
for {set i 0} {$i < $val(nn) } { incr i } {
    $ns at $val(stop) "\$n$i reset"
}
$ns at $val(stop) "$ns nam-end-wireless $val(stop)"
$ns at $val(stop) "finish"
$ns at $val(stop) "puts \"done\" ; $ns halt"
$ns run



information about Simulating Denial of Services Attack in Wireless Sensor Networks has been completed in the discussion

hopefully information Simulating Denial of Services Attack in Wireless Sensor Networks can benefit you in getting the latest information about technology,

you just read the article entitled Simulating Denial of Services Attack in Wireless Sensor Networks if the article feel useful for you please bookmark or share by using link https://micromyaw.blogspot.com/2012/12/simulating-denial-of-services-attack-in.html and thank you.

Tag :
Share on Facebook
Share on Twitter
Share on Google+
Tags :

Related : Simulating Denial of Services Attack in Wireless Sensor Networks

0 comments:

Post a Comment